COPPER

A PS Audio Publication

Issue 223 • Free Online Magazine

Issue 223 The Listening Chair

PMC’s prophecy1 Loudspeaker Holds the Line

PMC’s prophecy1 Loudspeaker Holds the Line

Recently, The Listening Chair’s Adam Goldfarb reviewed The Professional Monitor Company Ltd.’s prophecy9 floorstanding transmission line bass loading loudspeaker ($12,999 per pair/all prices USD). For most, that company is simply known as “PMC.” Adam’s review will be published on The Listening Chair’s new website, which is coming soon at www.thelisteningchair.net.

I have always been curious about transmission line speakers. This type of speaker absorbs unwanted frequencies that radiate from the rear of the speaker’s bass driver(s), resulting in high sound pressure levels and deep bass extension. By passing the lowest frequencies through a folded line or tunnel within the speaker's cabinet that emerges from a vent, it is said that the upper bass and midrange frequencies exhibit extremely low distortion and the speaker can play at low volumes without loss of frequency response.  

Over the years, I have heard transmission line speakers at audio shows and elsewhere. But you don’t really get to know a speaker (or the effectiveness of its particular design) until you have lived with it. So, I elected to use Adam’s review as an excuse to audition in my home theater system a different PMC transmission line speaker, the bookshelf prophecy1 ($4,299/pair). Not so coincidentally, I figured that this speaker would make a great subject for this photo column.

 

 

PMC's prophecy1 loudspeaker.

 

Right out of the gate, getting the prophecy1 out of its box at least partially answered the question of why the speaker costs what it does. Its large transmission tunnel and external vent, both aluminum, make for one heavy (23 pounds per channel), impeccably made speaker that can’t be inexpensive to produce.

Ultimately, the question of whether the prophecy1’s cost was justified was fully answered when I heard it in action. I will leave it to Adam’s prophecy9 review to get into the sonic details for that member of the prophecy family. Suffice it to say that for me, I was so beguiled with what I heard that I subsequently added the prophecyC center channel ($3,299/not pictured) to my system.

I hope that you enjoy my photos. The prophecy1 is one speaker that’s beautiful both inside and out.

 

 

 

The transmission line vent adds a distinctive design element.

 

 

The speaker looks striking with its grille on or off.

 

 

Connecting the prophecy1 is simplicity itself.

 

 

All photos courtesy of Howard Kneller.

Also note TLC’s growing TLC social media ecosystem, including its Facebook page (https://www.facebook.com/profile.php?id=61556741638528) and group (https://www.facebook.com/groups/217745678009888), the latter where members from around the world show off their gear; plus its LinkedIn (https://www.linkedin.com/in/howard-kneller/), Instagram (www.instagram.com/howardkneller/), Threads (www.threads.net/@howardkneller) and X (www.x.com/HowardKneller) pages.

More from Issue 223

World Fusion Meets Flamenco in Gratitude from Steve Mullins and Rim of the Well
World Fusion Meets Flamenco in Gratitude from Steve Mullins and Rim of the Well
Frank Doris
Judging Albums by Their Covers
Judging Albums by Their Covers
Rich Isaacs
Recent Arrivals and 12-inch Royalty
Recent Arrivals and 12-inch Royalty
Rudy Radelic
Summer of Creem, Part Two
Summer of Creem, Part Two
Wayne Robins
Recording Engineer Barry Diament of Soundkeeper Recordings: Striving for Natural Sound
Recording Engineer Barry Diament of Soundkeeper Recordings: Striving for Natural Sound
Frank Doris
Tea on the Terrace
Tea on the Terrace
B. Jan Montana
View All Articles in Issue 223

Search Copper Magazine

#225 Capital Audiofest 2025: Must-See Stereo, Part One by Frank Doris Dec 01, 2025 #225 Otis Taylor and the Electrics Delivers a Powerful Set of Hypnotic Modern Blues by Frank Doris Dec 01, 2025 #225 A Christmas Miracle by B. Jan Montana Dec 01, 2025 #225 T.H.E. Show New York 2025, Part Two: Plenty to See, Hear, and Enjoy by Frank Doris Dec 01, 2025 #225 Underappreciated Artists, Part One: Martin Briley by Rich Isaacs Dec 01, 2025 #225 Rock and Roll is Here to Stay by Wayne Robins Dec 01, 2025 #225 A Lifetime of Holiday Record (and CD) Listening by Rudy Radelic Dec 01, 2025 #225 Little Feat: Not Saying Goodbye, Not Yet by Ray Chelstowski Dec 01, 2025 #225 How to Play in a Rock Band, Part 18: Dealing With Burnout by Frank Doris Dec 01, 2025 #225 The People Who Make Audio Happen: CanJam SoCal 2025 by Harris Fogel Dec 01, 2025 #225 Chicago’s Sonic Sanctuaries: Four Hi‑Fi Listening Bars Channeling the Jazz‑Kissa Spirit by Olivier Meunier-Plante Dec 01, 2025 #225 From The Audiophile’s Guide: Controlling Bass Frequencies Through Membrane Absorbers (and How to Build Your Own) by Paul McGowan Dec 01, 2025 #225 Your Editor’s Tips for Attending Audio Shows by Frank Doris Dec 01, 2025 #225 PS Audio in the News by Frank Doris Dec 01, 2025 #225 Back to My Reel-to-Reel Roots, Part 24 by Ken Kessler Dec 01, 2025 #225 Holiday Music by Frank Doris Dec 01, 2025 #225 Puppy Prognostication by Peter Xeni Dec 01, 2025 #225 How to Post Comments on Copper by Frank Doris Dec 01, 2025 #225 Living Color by Rudy Radelic Dec 01, 2025 #224 T.H.E. Show New York 2025, Part One: A New Beginning by Frank Doris Nov 03, 2025 #224 Fool’s Leap of Faith is the Extraordinary Octave Records Debut from Singer/Songwriter Tyler Burba and Visit by Frank Doris Nov 03, 2025 #224 The Beatles’ “Aeolian Cadences.” What? by Wayne Robins Nov 03, 2025 #224 Persona Non Grata by B. Jan Montana Nov 03, 2025 #224 Talking With Recording Engineer Barry Diament of Soundkeeper Recordings, Part Two by Frank Doris Nov 03, 2025 #224 B Sides, B Movies, and Beware of Zombies by Rudy Radelic Nov 03, 2025 #224 The Burn-In Chronicles: 1,000 Hours to Sonic Salvation by Olivier Meunier-Plante Nov 03, 2025 #224 A Conversation With Mat Weisfeld of VPI Industries by Joe Caplan Nov 03, 2025 #224 Blues-Rocker Kenny Wayne Shepherd Celebrates 30 Years of Ledbetter Heights by Ray Chelstowski Nov 03, 2025 #224 Playing in a Rock Band, 17: When Good Gigs Go Bad, Part Two by Frank Doris Nov 03, 2025 #224 From The Audiophile’s Guide: Dealing with Odd-Shaped Rooms by Paul McGowan Nov 03, 2025 #224 TEAC’s TN-3B-SE Turntable Plays Bob Dylan by Howard Kneller Nov 03, 2025 #224 PS Audio in the News by Frank Doris Nov 03, 2025 #224 Lost in Translation by Peter Xeni Nov 03, 2025 #224 Reel-to-Reel Roots, Part 23: Better Than Rice Krispies by Ken Kessler Nov 03, 2025 #224 I Bring Joy! by Frank Doris Nov 03, 2025 #224 Screen Test by Rich Isaacs Nov 03, 2025 #224 How to Post Comments on Copper by Frank Doris Nov 03, 2025 #132 Dr. Patrick Gleeson: The Interview, Part Two by Rich Isaacs Oct 07, 2025 #223 World Fusion Meets Flamenco in Gratitude from Steve Mullins and Rim of the Well by Frank Doris Oct 06, 2025 #223 Judging Albums by Their Covers by Rich Isaacs Oct 06, 2025 #223 Recent Arrivals and 12-inch Royalty by Rudy Radelic Oct 06, 2025 #223 Summer of Creem, Part Two by Wayne Robins Oct 06, 2025 #223 Recording Engineer Barry Diament of Soundkeeper Recordings: Striving for Natural Sound by Frank Doris Oct 06, 2025 #223 Tea on the Terrace by B. Jan Montana Oct 06, 2025 #223 How Good Can Car Audio Get? by Joe Caplan Oct 06, 2025 #223 The Advantages of a Dedicated Listening Room by Paul McGowan Oct 06, 2025 #223 1! 2! 3! 4! Surrounded by the Ramones in Dolby Atmos! by Frank Doris Oct 06, 2025

PMC’s prophecy1 Loudspeaker Holds the Line

PMC’s prophecy1 Loudspeaker Holds the Line

Recently, The Listening Chair’s Adam Goldfarb reviewed The Professional Monitor Company Ltd.’s prophecy9 floorstanding transmission line bass loading loudspeaker ($12,999 per pair/all prices USD). For most, that company is simply known as “PMC.” Adam’s review will be published on The Listening Chair’s new website, which is coming soon at www.thelisteningchair.net.

I have always been curious about transmission line speakers. This type of speaker absorbs unwanted frequencies that radiate from the rear of the speaker’s bass driver(s), resulting in high sound pressure levels and deep bass extension. By passing the lowest frequencies through a folded line or tunnel within the speaker's cabinet that emerges from a vent, it is said that the upper bass and midrange frequencies exhibit extremely low distortion and the speaker can play at low volumes without loss of frequency response.  

Over the years, I have heard transmission line speakers at audio shows and elsewhere. But you don’t really get to know a speaker (or the effectiveness of its particular design) until you have lived with it. So, I elected to use Adam’s review as an excuse to audition in my home theater system a different PMC transmission line speaker, the bookshelf prophecy1 ($4,299/pair). Not so coincidentally, I figured that this speaker would make a great subject for this photo column.

 

 

PMC's prophecy1 loudspeaker.

 

Right out of the gate, getting the prophecy1 out of its box at least partially answered the question of why the speaker costs what it does. Its large transmission tunnel and external vent, both aluminum, make for one heavy (23 pounds per channel), impeccably made speaker that can’t be inexpensive to produce.

Ultimately, the question of whether the prophecy1’s cost was justified was fully answered when I heard it in action. I will leave it to Adam’s prophecy9 review to get into the sonic details for that member of the prophecy family. Suffice it to say that for me, I was so beguiled with what I heard that I subsequently added the prophecyC center channel ($3,299/not pictured) to my system.

I hope that you enjoy my photos. The prophecy1 is one speaker that’s beautiful both inside and out.

 

 

 

The transmission line vent adds a distinctive design element.

 

 

The speaker looks striking with its grille on or off.

 

 

Connecting the prophecy1 is simplicity itself.

 

 

All photos courtesy of Howard Kneller.

Also note TLC’s growing TLC social media ecosystem, including its Facebook page (https://www.facebook.com/profile.php?id=61556741638528) and group (https://www.facebook.com/groups/217745678009888), the latter where members from around the world show off their gear; plus its LinkedIn (https://www.linkedin.com/in/howard-kneller/), Instagram (www.instagram.com/howardkneller/), Threads (www.threads.net/@howardkneller) and X (www.x.com/HowardKneller) pages.

0 comments

Leave a comment

0 Comments

Your avatar

Loading comments...

🗑️ Delete Comment

Enter moderator password to delete this comment: